Independent houses
Single and double-storey homes on 5 to 20 marla plots. An RCC frame with red-brick walls is still the Tricity standard, at roughly 4 kg of steel per sq ft.
OPC 53Grit (बजरी) 20 mmRed bricksFe 500D
Today Panchkula rates updated
Every bag, brick and grit your build needs.
Atharv Enterprises supplies cement, sand, crushed stone, bricks and TMT steel across Panchkula and the Tricity. Check today's rates and work out what your house will cost before the first truck arrives.
Example estimate only, not the real price. Your cost depends on your drawings, site and the day's rates.
What we supply
Five materials hold up almost every building in the Tricity.
We stock the structural materials your contractor asks for, in the grades they ask for, and deliver them to your site in the quantity the job needs.
Cement
सीमेंट · OPC 53 & PPCBinds every mix, from footing concrete to wall plaster.
Sand
रेता · coarse & fineCoarse for concrete and mortar, fine Yamuna sand for plaster.
Grit (बजरी)
बजरी · 10 & 20 mmCrushed stone that gives concrete its strength.
Bricks & blocks
ईंट · clay, fly-ash, AACWalls, boundary walls and parapets.
TMT steel
सरिया · Fe 500DReinforcement inside every column, beam and slab.
How a house is built
From the first pit to the last coat of paint.
A typical Panchkula home is an RCC frame: concrete footings, columns, beams and a roof slab, with brick walls in between. Here is where each material goes, stage by stage.
Stage 6 of 6 · Plaster & finishing
Together that is about 400 bags of cement, 1,770 cft of sand, 1,360 cft of grit, 4 tonnes of steel and 8,000 bricks for 1,000 sq ft. Your engineer's drawings set the exact figures.
Beyond houses
The same five materials, mixed for different buildings.
What changes from a house to a showroom is the grade, the ratio and the quantity. We help your site team order the right mix.
Builder floors, G+2 and G+3
Independent floors in Panchkula sectors and Zirakpur. AAC blocks cut the dead load on upper storeys, and slabs usually move up to M25 concrete.
AAC blocksOPC 53Branded TMTGrit (बजरी) 10 mm
Shops & showrooms
Wider spans and heavier floor loads need about 10% more steel per sq ft than a house.
Fe 550DOPC 53
Boundary walls
9-inch brick walls on a PCC footing take about 11 bricks for every sq ft of wall face.
Red bricksPPC
Driveways & CC floors
M20 concrete with 20 mm grit, or 60 to 80 mm paver blocks on a stone-dust bed.
Grit (बजरी) 20 mmStone dust
Know your budget before you break ground.
Enter your plot size and number of floors. The estimator lists every bag, cft and kg, priced at today's rates.